| Standard No |
Title of Standard |
ISBN |
Published |
Also Known As |
| BS EN ISO 8666 |
Small craft. Principal data |
0 580 40813 2 |
26/11/2002 |
ISO 8666:2002 |
| BS EN ISO 8669-2 |
Urine collection bags. Requirements and test methods |
0 580 27419 5 |
15/05/1997 |
ISO 8669-2:1997 |
| BS EN ISO 8670-2 |
Ostomy collection bags. Requirements and test methods |
0 580 27420 9 |
15/05/1997 |
ISO 8670-2:1997 |
| BS EN ISO 8673 |
Hexagon nuts, style 1, with metric fine pitch thread. Product |
0 580 36191 8 |
15/02/2001 |
ISO 8673:2001 |
| BS EN ISO 8674 |
Hexagon nuts, style 2, with metric fine pitch thread. Product |
0 580 36192 6 |
15/02/2001 |
ISO 8674:2001 |
| BS EN ISO 8675 |
Hexagon thin nuts (chamfered) with metric fine pitch thread. P |
0 580 36193 4 |
15/02/2001 |
ISO 8675:2001 |
| BS EN ISO 8676 |
Hexagon head screws with metric fine pitch thread. Product gra |
0 580 36194 2 |
15/02/2001 |
ISO 8676:2001 |
| BS EN ISO 868 |
Plastics and ebonite. Determination of indentation hardness by |
0 580 41701 8 |
25/04/2003 |
ISO 868:2003 |
| BS EN ISO 8689-1 |
Water quality. Biological classification of rivers. Guidance o |
0 580 34789 3 |
15/08/2000 |
ISO 8689-1:2000 |
| BS EN ISO 8689-2 |
Water quality. Biological classification of rivers. Guidance o |
0 580 34790 7 |
15/08/2000 |
ISO 8689-2:2000 |
| BS EN ISO 8692 |
Water quality. Freshwater algal growth inhibition test with un |
0 580 44587 9 |
18/10/2004 |
ISO 8692:2004 |
| BS EN ISO 8728 |
Ships and marine technology. Marine gyro-compasses |
0 580 32226 2 |
15/03/1999 |
ISO 8728:1999 |
| BS EN ISO 8729 |
Ships and marine technology. Marine radar reflectors |
0 580 32227 0 |
15/03/1999 |
ISO 8729:1999 |
| BS EN ISO 8733 |
Parallel pins with internal thread, of unhardened steel or aus |
0 580 29084 0 |
15/05/1998 |
ISO 8733:1998 |
| BS EN ISO 8734 |
Parallel pins, of hardened steel or martensitic stainless stee |
0 580 29403 X |
15/05/1998 |
ISO 8734:1998 |
| BS EN ISO 8735 |
Parallel pins with internal thread, of hardened steel or marte |
0 580 29402 1 |
15/05/1998 |
ISO 8735:1998 |
| BS EN ISO 8739 |
Grooved pins. Full-length parallel grooved, with pilot |
0 580 29401 3 |
15/05/1998 |
ISO 8739:1998 |
| BS EN ISO 8740 |
Grooved pins. Full-length parallel grooved, with chamfer |
0 580 29400 5 |
15/05/1998 |
ISO 8740:1998 |
| BS EN ISO 8741 |
Grooved pins. Half-length reverse-taper grooved |
0 580 29068 9 |
15/05/1998 |
ISO 8741:1998 |
| BS EN ISO 8742 |
Grooved pins. One-third-length centre grooved |
0 580 29063 8 |
15/05/1998 |
ISO 8742:1998 |
